The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Breva 750 V7 I V7 II Nevada 750 2004- Exhausts

Sort by Title

Sort by Price

Page 3 of 7

1 2 3 4 5 6 7

Gasket Exhaust Manifold

ENA29022 Fits Breva 750, Nevada ALL, V65 ALL, V7 Classic, V7 Racer, V7 Cafe, V75 4 valve, V7 II ALL

Dimensions:
28mm internal diameter x 40.8mm outer dimeter x 3mm

Exhaust gasket. Please note that these may need to be trimmed down slightly to fit a V35 / V50. See ENA22040 for alternative

Also known as Guzzi ref. 61025280 19025280. ENA22040 can be used in place of this gasket

part in stock More than 5 in stock

61025200 GU61025200 61 02 52 00
6102 5200 6102.5200 61.02.52.00

£2.00

INC VAT

£1.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Gasket Exhaust Manifold

ENA85091 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT

Dimensions:
44mm OD

Exhaust gasket for standard downpipes, less expensive alternative to factory part

Copper gasket

part in stock 3 in stock

852090 MG852090

Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660

£6.00

INC VAT

£5.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Gasket Exhaust Manifold OE

ENA85090 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT

Exhaust gasket for standard downpipes

Composite gasket, see ENA85091 for less expensive alternative

This part is available by special order, request a quote

852090 MG852090

Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660

£19.00

INC VAT

£15.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Insulating Washer

EXA82297 Fits Breva 750, Nevada 750 (2004-), V7 Racer (2011), V7 Cafe (2009-2012)

Insulating washer, used for attaching exhaust heatshield

part in stock More than 5 in stock

AP8221297

£1.50

INC VAT

£1.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Lambda Sensor

ELA32727 Fits 1200 Sport (2006-20011), Breva ALL, Bellagio, Cali EV (2003-2005), Cali Aquila Nera, Cali Vintage, Cali Classic Touring, Griso ALL, Norge ALL, Stelvio (2008-2010), V11 Sport (2003-2005), V7 Classic, Nevada 750 (2004-2013), V7 Cafe, V7 Racer

Dimensions:
18mm thread

Lambda sensor. Wiring harness may be shorter that your existing connector on some modeels, and will therefore need extending.

This part is available by special order, request a quote

32727010 GU32727010 32 72 70 10
3272 7010 3272.7010 32.72.70.10

£115.00

INC VAT

£95.83 EX VAT this is the price you will pay if you are ordering from outside the UK

M8 Nut Stainless Steel Dome Head

SSA08003 Universal Part

Stainless steel M8 dome head nut, used for exhaust studs, gearbox and drive box studs

Many applications including gearbox, exhaust and bevel box mounts on big twins, V7 850, V85TT and V100. Also used on small twins for bevel box mount bolts. Also known as Guzzi ref. 860651

part in stock More than 5 in stock

£1.40

INC VAT

£1.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Centre Stand Stop Bracket Black

FRA33380 Fits V7 III Stone, V7 III Special, V7 III Anniversary, V7 III Carbon, V7 III Milano, V7 III Rough

Black centrestand stop bracket

This part is available by special order, request a quote

£25.00

INC VAT

£20.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Centre Stand Stop Bracket Satin

FRA33381 Fits V7 III Stone, V7 III Special, V7 III Anniversary, V7 III Carbon, V7 III Milano, V7 III Rough

Satin finish centrestand stop bracket

This part is available by special order, request a quote

£25.00

INC VAT

£20.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Crossover Pipe Stainless Steel

EXA30193 Fits Breva 750, V7 Cafe (2008-2012), V7 Classic (2008-2012), V7 Racer (2008)-2012), Nevada 750 (2004-2012)

Dimensions:
32mm ID x 269mm

Stainless steel crossover pipe, sounds much better than the original!

Handmade to order in Italy
Includes threaded hole for Lambda sensor. Improves performance and access to your oil drain plug. Supplied with stainless steel exhaust clamps

This part is available by special order, request a quote

£70.00

INC VAT

£58.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Crossover Pipe Stainless Steel

EXA32193 Fits V7 Stone, V7 Special, V7 II ALL

Dimensions:
32mm ID x 269mm

Stainless steel crossover pipe without Lambda sensor port for single throttle body models, sounds much better than the original!

Handmade to order in Italy
Improves performance and access to your oil drain plug. Supplied with stainless steel exhaust clamps. Also available in a satin finish by special order

This part is available by special order, request a quote

£70.00

INC VAT

£58.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 3 of 7

1 2 3 4 5 6 7